A/C Designs of St. Augustine, LLC Blog: Posts Tagged ‘Daytona Beach’

How High Humidity Can Cause Air Conditioning Problems

Friday, June 6th, 2014

Air conditioners are not designed specifically to combat humidity (although some models have dehumidifiers built into them). However, through their action of absorbing heat from the indoors of a home or building, they also remove some moisture from the air, and this can assist with lowering high humidity levels—and sometimes making a home too dry during periods of low humidity. Even without a dehumidifier, an AC will assist with making a humid Florida summer a bit easier to bear.

But the sometimes extreme levels of humidity in our state can mean problems for an air conditioner, as we’ll look at in this post. When you experience problems due to excess moisture in your air conditioning in Daytona Beach, FL, or any other AC repair need, call AC Designs Inc. right away. You can reach us 24 hours a day, every day.

The Trouble With High Humidity and an Air Conditioning System

Although your first instinct when thinking about what could go wrong because of humidity in an AV is probably “rust,” that’s rarely a problem with the rust-resistant components of an air conditioner. Corrosion in an AC usually happens due to household chemicals in the air.

The true problem with humidity extremes occurs in the drip pan, or condensate pan. The moisture from the air forms along the indoor evaporator coil in the air conditioner as it draws heat onto the coil. This moisture then drips down into the pan below, where a condensate pump draws it down a drain and safely into the wastewater system.

But huge amounts of moisture can contribute to the growth of algae inside the drain or the drain line, possibly even affecting the pump. When any of this happens, the drain with turn slow or clog completely. Because the drip pan is shallow, it will not take long for it to overflow and begin to spill water inside your house if the drain clogs or the pump malfunctions. This will lead to expensive water damage, mold and mildew growth, and a rise in the indoor humidity.

Should you spot water pooling around your air conditioner’s cabinet, call for repairs right away. Technicians will remove the pan and clean and repair the drain or pump, replacing components as necessary. They may also recommend installing a dehumidifier to combat the problem and alleviate some of your discomfort.

At AC Designs Inc., we not only handle repairs for air conditioning in Daytona Beach, FL, but we handle indoor air quality care with dehumidifiers and air purifiers. For the maximum comfort this summer for your home, call our team today.

Continue Reading

Install a New Air Conditioner Before Summer Arrives

Friday, May 16th, 2014

Have you been considering the purchase of a new air conditioning system for your property, or are thinking of upgrading an outdated one? Spring offers a great window of time to do either, so if you’ve been thinking about it, let the Daytona Beach air conditioning installation experts from AC Designs, Inc. tell you why spring can be a great time to install a new air conditioner.

Why Install in Spring?

Spring can be a great time to install a new air conditioning system or replace an outdated one: the uncomfortably warm weather hasn’t settled in for good yet, getting you ahead of the coming summer heat. But there are some other reasons to consider installing an air conditioning system before summer arrives this year:

Better Technician Availability

Summer is the busy season for air conditioners, lessening technician availability for repairs, maintenance and installation. No one wants to sweat it out waiting for an available professional, particularly in the middle of summer. By installing your new air conditioner in the spring, you can avoid the busy-season wait, and be cool and comfortable when it counts.

Murphy’s Law

A fact our AC Designs, Inc., experts have seen over and over again: the chances of a struggling air conditioner breaking down during the hottest time of the year is very good. Why? Any air conditioner has to work hard in excessive heat and humidity; a struggling system does, too, and most likely with less ability due to aging, wear-and-tear and possible pre-existing problems. Ideally, air conditioning replacement should happen on your timetable, not on the weather’s. By installing a new system before summer, you can avoid rushing into purchasing a new air conditioner.

Have Questions About Spring Installation? Call an Expert

A springtime air conditioning installation doesn’t have to be a difficult endeavor, and it can help you get ahead of potential problems with your existing AC. By working with an AC Designs, Inc., expert, you can get the help you need in choosing the right air conditioning system for your property. Call AC Designs, Inc., today and schedule a consultation for your air conditioning service in Daytona Beach, FL.

Continue Reading

3 Reasons to Install Heat Pumps in Daytona Beach

Friday, April 25th, 2014

Heat pumps make an alternative to more traditional forms of heating and cooling systems. They work the same way an air conditioner does: moving refrigerant gas through a series of valves and coils that first shift the gas into a liquid (releasing heat in the process) then revert it back to a gas (cooling the air around it). The only difference is that an air conditioner vents the hot air as waste. The heat pump harnesses it to warm your home in the winter as well as using the cool air to keep your home comfortable in the summer. Here in Daytona Beach, air conditioning systems are more important than heating systems, but our winters get cold enough to make heat pumps a very attractive option. Here are 3 reasons to install heat pumps in Daytona Beach.

  • They save you money
    Heat pumps don’t use gas or other fuel to generate hot or cold air. They simply facilitate a heat exchange with the refrigerant. That means they use far less energy than other forms of heating and cooling, which can save you a great deal of money in monthly expenses. Over time, that can help pay for the cost of installation, and even off-set it in some cases.
  • They’re simple to use
    Because the heat pump contains heating and cooling technology in one unit, you don’t need to purchase separate heating and air conditioning units. This can come as a great relief in households that can’t comfortably accommodate a second such device.
  • They match the climate well
    The one downside to heat pumps is that they can’t heat the home as efficiently as they should when temperatures drop close to freezing. (That’s one of the reasons you don’t see them in climates further north.) But here in Florida, that’s rarely a problem, since our tropical climate keeps the temperatures well above freezing throughout the year.

If you’re thinking of reasons to install heat pumps in Daytona Beach, call the air conditioning experts at AC Designs Inc. to help. We have years of experience with heat pump technology and we can explain the ins and outs to you before helping you pick the best system that works for your home.

For quality air conditioning service in Daytona Beach, look no further than AC Designs Inc. to help get your home comfort where you want it. Give us a call today!

Continue Reading

Signs of Heat Pump Short Cycling

Tuesday, February 18th, 2014

“Short-cycling” refers to a problem that can occur in an HVAC system when it shuts down before it can complete one of its heating or cooling cycles. There are a number of reasons why this might happen, but one of the most common is that a HVAC system was improperly sized when it was installed and is too powerful for the space it is supposed to condition.

Short cycling will not only result in inferior heating and/or cooling, but it will place a large strain on the system, forcing it to work harder and age faster, and subsequently drain power and raise bills.

Heat pumps can short cycle in either heating or cooling mode. Whenever short cycling begins, you need to call for repairs as soon as possible for your heat pump in Daytona Beach, FL. If you let the problem persist, you will risk a system breakdown. Contact AC Designs Inc. any time of the day or night when you need help with your heat pump.

Signs Your Heat Pump is Short Cycling

The most immediate sign of short cycling is the sound coming from the heat pump. You should be accustomed to the familiar sound of the fan and then the compressor coming on during the heating and cooling cycles. If this sound starts to change because the compressor is behaving differently (shutting off early), it usually means short cycling is occurring.

Short cycling will often result in an uneven distribution of heating and cooling in your home. If the system shuts down early, it will not have proper time to reach all the rooms. If you find hot or cold spots in your house, call for repairs for the heat pump.

A less obvious warning sign is changes in your power bill. If you notice an increase in your bills that you cannot account for because of increased use or a change in seasons, then you should investigate the heat pump as a possible source. You’ll have a hard time doing this on your own, however: proper diagnosis requires trained HVAC technicians.

How Professionals Can Help

Because short-cycling can come from a variety of sources in a heat pump—loss of refrigerant, icing over the coils, problems with a damaged control board, issues in the compressor—it requires trained professionals to find what is occurring and how to stop it. If the problem is an oversized heat pump, the technicians can advise you about having a replacement put in and if new installation is your best option.

AC Designs Inc. is ready to help you with any problems you have with your heat pump in Daytona Beach, FL. Our technicians are ready 24 hours a day to assist you.

Continue Reading

AFUE: How Your Furnace’s Efficiency Is Measured

Wednesday, January 29th, 2014

Furnaces come in all shapes and sizes, which means there are many different options to choose from. There needs to be a base line to measure your furnace’s efficiency: to tell you that one model functions more effectively than another (and thus may be worth a more expensive sticker price). That baseline is called the AFUE, which stands for Annual Fuel Utilization Efficiency rating, and it’s how your furnace’s efficiency is measured.

The formula for deriving the AFUS rating is fairly simple. You divide the amount of energy the furnace uses by the amount of energy of useful heating it creates. The result is a number, measured as a percentage, that shows you how much of the furnace’s energy is actually being used to heat your home.

So obviously, the higher the AFUE rating, the better your furnace will perform and the more it will save you money on monthly costs. You’ll need to weigh these savings against the initial cost of the unit itself, which is bound to be higher for more efficient furnaces. With good advice from a trained, you can likely find a unit that hits the right combination of efficiency and affordability to match your circumstances.

If efficiency is all you’re after, there’s a handy cheat sheet you can use. The EnergyStar sticker denotes furnaces that have an AFUE rating of 90% or higher, giving you a quick answer to how your furnace’s efficiency is measured. As for the good advice, in Daytona Beach, furnace questions of all kinds can be answered by the professionals at AC Designs Inc. We know you want the most efficient furnace you can get and we’ll work with you to find the proper size and model to suit your unique circumstances. We’re dedication to your complete satisfaction during every step of the process, so don’t hesitate to give us a call today.

Continue Reading

How Can a Heat Pump Heat When it’s Chilly Outside?

Tuesday, December 10th, 2013

Here in Daytona Beach, heat pumps are an attractive option for keeping your home comfortable. The system combines the functions of a heater and an air conditioner into one unit, allowing to work in the summer and the winter alike. It works best in areas where the temperature doesn’t drop below 30 degrees Fahrenheit, which means it’s optimal for homes in Florida. Even here, however, we get the occasional chilly evening, which is the one time when a heat pump might struggle. How can a heat pump heat when it’s chilly outside?

Heat pumps use the same basic system that an air conditioner does. Refrigerant gas passes through a compressor, which first subject the gas to a great deal pressure (which raises the temperature). Then the gas goes to the condenser coils, which release the heat into the outside air and condense the refrigerant to a high-pressure liquid. The liquid then travels into a series of evaporator coils, where it returns it to a gaseous state: pulling heat from the surrounding air in the process.

In the summer, the heat pump’s indoor coils acts as the evaporator, cooling the air and using a fan to blow it into your home. The compressor coils are located outside, allowing the heat to dissipate into the outside air. In the winter, the indoor coils act as the condenser coils, generating heat for use in your home while the outside coils act as evaporators and absorb heat from the outside. Even if the weather is cold, there is always some heat in the air for the heat pump to absorb. However, when the temperature gets around freezing, the heat pump will stop being able to heat efficiently. Most heat pumps are equipped with electric resistance coils that can kick on when the weather is very cold to keep your home comfortable.

If you’re interested in a heat pump in Daytona Beach, contact AC Designs, Inc. We can discuss your options with your before installing a heat pump in your home. Give us a call today!

Continue Reading

Clogged Filters and Air Conditioning Repair in Daytona Beach

Tuesday, October 22nd, 2013

Air conditioning repair in Daytona Beach can be a serious matter, with our hot weather nearly year round. Anything you can do to defer or delay a serious repair call will leave you and your family without a cool, comfortable home on hot days. Along with regular maintenance visits, changing your air filters regularly will help keep your air conditioner in good condition and lower the risk of repairs. Here’s the link between clogged filters and air conditioning repair in Daytona Beach.

In addition to helping keep dust and dirt out of your home, air filters help keep your air conditioner itself clear of dust and debris. When duct gathers on internal components, it can seriously affect your air conditioner’s ability to do its job: increasing friction on moving parts and preventing the evaporator coils from cooling the air as wells as they should. As strain on the unit builds, your monthly air conditioning costs will go up, as well as increasing the chances of a significant breakdown in the near future.

The air filter is supposed to stop all of that, or at least delay the build-up of dust and dirt in the system. When the filter gets clogged, however, it’s not doing its job, and probably reducing air flow into your home to boot.

You can help alleviate a lot of these problems simply by changing your air filter before it gets clogged. The exact time to do that can vary, though, depending on how much dust you have in your home and if you have any pets.

To that, add a regular maintenance schedule from a trained professional. He can clean the dust and debris off of the air conditioning components, as well as tightening loose bolts and recharging low refrigerant. If you are concerned about clogged air filters, the experts at AC Designs can help. Call us today to set up an appointment.

Continue Reading

Air Conditioning FAQ 2: Types of Refrigerant

Monday, September 23rd, 2013

Your air conditioner depends on a chemical called refrigerant to transfer heat from inside your home and into the warm Florida air outdoors. In the early days of electrical ACs, the chemical used for refrigerant was usually propane, ammonia, or methyl chloride. These gases are either toxic or flammable, and made primitive air conditioners potentially dangerous. In 1928, ACs got their first non-flammable, non-toxic chlorofluorocarbon gas, known as “Freon.” Although the term Freon is still used to describe refrigerants in general, many different mixtures have been used since 1928. In this post we’ll talk about the two most commonly found in home air conditioners, R-22 and R-410A, and what you should know about them.

R-22 and R-410A may sound like robots from the Star Wars universe, but the names actually designate their molecular composition. Although they may sound similar, the differences between them are significant.

R-22 is a hydrochlorofluorocarbon (HCFC) and is the older of the two mixtures. For 40 years, it was the top choice for air conditioner refrigerant. Although it has a lower ozone-depleting level than the compounds used before it, its level is now considered unacceptable. In accordance with the Montreal Protocols, the U.S. has started a phase-out program for R-22. Manufacturers have not been permitted to make new units using R-22 since 2010, and by 2020 the compound should be completely phased out, with chemical companies no longer permitted to provide it to service existing air conditioners.

R-410A, trademarked under the name Puron, was created as a replacement for R-22. It is a mix of difluoromethane (R-32) and pentafluoroethane (R-125). Unlike R-22, it contains only fluorine and poses no danger to the ozone layer. If you have an air conditioner that was installed after 2009, the chances are high that you have R-410A moving through its coils.

Your AC unit will have a listing on its cabinet that details what refrigerant it contains. If your air conditioner uses R-22, don’t worry yet. You might consider a replacement system, but you should weigh your long term housing plans and the warranty on your current system. The best advice you can get regarding replacing an air conditioner that uses R-22 is from a professional HVAC company that deals with refrigerants every day. AC Designs Inc. is ready to give you the help you need and your air conditioning in Daytona Beach top-level maintenance.

Continue Reading

Can Routine Maintenance Ward Off a Costly Air Conditioning Repair

Monday, September 9th, 2013

A good, efficient air conditioner is a must for living in Florida. Our summers are hot and muggy, and the temperature remains high the rest of the year as well. But you shouldn’t expect your AC that has happily chugged away keeping you cool to do so indefinitely. Like any device, an air conditioner will begin to suffer wear and tear after years of use. Scheduling routine maintenance can help prevent the need for air conditioning repair in Daytona Beach.

Think of your air conditioner as if it were a car. In Daytona Beach, chances are that you run your air conditioner more often than you drive your car—probably much more often. You wouldn’t let your car run make do without regular tune-ups. Why should a complex and important machine like your air conditioner get different treatment? Having either your car or air conditioner break down is an enormous hassle. Routine maintenance is one of best ways to see that it doesn’t happen.

At AC Designs, Inc., we always recommend that our customers enroll in a preventive maintenance program. We wouldn’t do this if we didn’t know from experience that routine maintenance can ward off very costly fixes to your air conditioner down the road—or even the need for a complete replacement of the system.

When an HVAC professional comes to your home for regular maintenance, you will receive a full check on all the components in your air conditioner to make sure they are operating at optimal levels. The maintenance technician will examine the airflow, filters, electrical connections, air handler cabinet, evaporator coils, and motors. If necessary, the technician will drain the condensate pan and clean out the drain. If any serious problems are discovered, you will receive a recommendation on what repairs should be done.

The professionals at AC Designs Inc. are all NATE-certified and will provide you with the high quality air conditioning repair in Daytona Beach that you need. Set up an appointment with us today!

Continue Reading